Home > GNSS Receiver > USB GNSS Receiver > GNSS100G

USB glonass receiver

  • Model:GNSS100G
  • GNSSMode:GPS+GLONASS
  • Refresh rate:1HZ(default) can be set 5-10Hz
  • Working level:USB
  • Baud rate9600 (Baud rate can be set)
  • Operating voltage(V):5.0V
  • Operating current:≤45mA
  • Connector type:USB
  • size(mm):52*52*20mm
  • Weight(g):85g
  • NMEA MessageUBX,NMEA0183
  • Receiving channel72
  • Cable length:1.5 meters
  • Brand:TOPGNSS

Chip: ublolx8030GNSS CHIP Working mode: GPS, GPS+GLONASS, GPS+BEI DOU (can be set) Output protocol: USB Cable length: 1.5 meters Model: GNSS100G

STOTON GPS receiver GNSS100G with special light and 100% other waterproof design, using the UBLOX8030 GNSS chipset with built-in active type ceramic antenna so that more accurate positioning; especially suitable for use with a variety of outdoor activities, non slip bottom can be easily used in various vehicles, ships and aircraft. Products can be applied to: network optimization, vehicle navigation, navigation, fleet management, base services, automatic driving, personal navigation, travel equipment, track equipment, systems and mapping applications, etc..

 Connector: RS232  

• u-blox 8 UBX-M8030-KT chipset

• Frequency:

  GPS: L1, 1575.4200 MHz

  GLONASS: L1, 1602 (k x 0,5625) MHz

  BEIDOU COMPASS: B1, 1561.0980 MHz

  GALILEO E1, 1575.4200 MHz

  QZSS L1, 1575.4200 MHz

• Accepts the signals of up to 72 satellites at the same time

• Supports AssistNow online/offline,

  SBAS (WAAS, EGNOS, QZSS and MSAS)

• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG                             

• Auto Baud Rate up to (4800-9600-38400-115200 bps

• Update rate:

  single GNSS: 18 Hz (e.g. GPS solo)

  multi GNSS: 10 Hz (e.g. GPS+GLONASS)

• Sensibility max. –167 dBm

• IPX6 protection class

• Magnetic, non-slip on the bottom

• LED-indicator for GPS-status

• Operating temperature: -20 °C ~ 60 °C

• Power supply: 3.5V-5.0V 

• Current consumption: max. 45 mA

• Cold start in ca. 26 seconds

• Hot start in ca. 1 second

• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and

  2 m CEP with SBAS

• Cable length: ca. 1.5 m

• Dimensions (LxWxH): ca. 52 x 52 x 21 mm

 GPS+GLONASS

QQ图片20160325161124_副本.jpg

GPS+BEI DOU




TAG:  stoton usb gnss receiver USB GNSS Receiver

Email:sales@stotoncn.com

top gnss receiver manufacturer

;